Calacatta Aureo Gold & Gray Octave 12x12 Polished/Honed Marble Mosaic Tile

The Calacatta Aureo Collection embodies luxury and sophistication, showcasing the timeless beauty of premium Italian marble. Featuring a luminous white background with striking gold and grey veining, this collection adds depth, warmth, and opulence to any space. Whether used for walls, floors, countertops, or feature areas, Calacatta Aureo elevates interiors with its refined elegance and enduring appeal.

Description

• Material: Premium Italian Calacatta Aureo marble, featuring a luminous white field enriched by graceful gold and gray veins—embodying luxurious sophistication. 
• Finish: Offered in two options: Polished — glossy, reflective, high-shine; Honed — matte / subtle texture, softer visual tone.
• Size Available: Mesh-mounted mosaic sheet measuring 12″ × 12″, covering approximately 1 sq ft per sheet.
• Thickness: Approximately ⅜″ (~10 mm)—typical of premium marble mosaics. (No explicit value found, but consistent with similar products in the collection.)
• Application Ideas: Ideal for statement backsplashes, elegant shower walls, feature accent panels, vanity surrounds, or decorative flooring details. Suited for both residential and commercial settings where luxury and pattern matter.
• Style: Octave mosaic, long octagon geometry, marble elegance, gold-gray veining, architectural texture.

Key Features

• Architectural Rhythm: The long octagon (“octave”) pattern provides a bold, rhythmic layout that reduces grout lines and introduces strong visual interest.
• Subtle Tonal Variation: Gold & gray veining adds depth and warmth without overwhelming, allowing the pattern to stand out while remaining refined.
• Finish Flexibility: Polished finish enhances light and formality; Honed offers a more subdued, tactile feel—giving you control over the ambiance.

Care & Maintenance

• Installation Tips: Always dry-fit sheets to check veining alignment and pattern flow. Use white thin-set mortar to preserve the marble’s bright tones. Maintain narrow grout joints (≈ 1⁄16″) for crisp pattern edges.
• Sealing: Apply a high-quality stone sealer before grouting, clean thoroughly, then seal again after installation to prevent stains and moisture absorption.
• Cleaning: Use pH-neutral, non-abrasive cleaners with soft cloths. Avoid acidic or abrasive agents that may dull or damage the marble’s surface.
• Natural Variation: Expect natural differences in veining intensity, shade, and pattern between sheets—these variances are part of marble’s inherent beauty. Inspect material prior to installation to ensure a consistent, desirable aesthetic.

MATERIAL INSPECTION

Our stones are natural products. For this reason, there will be naturally occurring variations in the color, pattern, texture, and veining that may differ from what was pictured. Before you begin installation, please inspect the goods for any damage or defects such as chipped edges, broken pieces. We cannot make any adjustments or provide service after the installation has begun.

INSTALLATION

We recommend that you dry-fit your pattern first. Think about the cuts in advance and visualize the installation. Make sure that you practice laying out the pattern. This will also help you plan out the placement of the pieces, which is especially helpful with tiles that have a lot of variation.

To avoid affecting the color of the tile, we highly recommend using white thinset mortar. For faster installation, use a rapid curing thinset mortar.

• Apply as much adhesive as can be covered within 10-15 minutes.
• Grout joint should be a minimum of 1/16” and not butt set.
• Use a 3/16" or 1/4" square notch trowel when installing our marble material
• Prior to fixing the tiles in the mortar bed, use the flat side of the trowel prior to smooth down the ridges. 

GROUTING

• For all-natural stone, we suggest using non-sanded grout in order to prevent scratching.
• Before grouting, test an area to make sure the stone surface will not scratch.
• Grout joints should be packed full. Do not leave pits or voids.
• Clean excess grout as you work. Do not let it harden completely.
• Never use acids to clean grout haze.
• Use a damp sponge for the final cleaning and to smooth out the grout joints.
• We highly recommend applying grout release prior to grouting the tile to facilitate cleaning and for protection against staining from contrasting color grouts.

SEAL

After the stone is installed and grouted, seal the stone with an appropriate high-quality breathable stone sealer. This will minimize the potential for water absorption, efflorescence, and staining. If needed, a color enhancer may be applied to bring out the true color of the stone at any time after grouting. You may choose to reseal the tile when the stone gets darker or as needed.

CUTTING

For the best results, use a wet-saw with a new, continuous rim diamond blade designed to cut marble. Do not use “turbo” or other notched blades designed for use with porcelain or ceramic: such teeth can result in a coarse cut, leading to a heavily chipped edge.

CARE AND MAINTENANCE

For normal care and maintenance of stone tiles, clean stone surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. To avoid leaving a film or causing streaks, avoid using too much cleaner or soap. When cleaning marble or limestone, do not use products that contain lemon, vinegar, or other acids. Do not use any abrasive cleaners.