Violetta White 4-3/4x12 Honed Marble Baseboard Trim
Fast Delivery
Insured Shipments
Easy Returns
Description
Violetta brings expressive plum and burgundy veining to a warm white marble canvas. Rich in natural movement, this collection pairs beautifully with oak, soft plaster tones and brushed brass for spaces that feel collected and personal.
Description
- Material: Natural marble with ivory, gray and deep burgundy variation.
- Finish: Honed, with a smooth matte surface that lets the natural veining take center stage.
- Size / Pattern: 4-3/4x12 inches; sold by the piece, each covering 1 linear foot.
- Thickness: 3/4 inch.
- Application Ideas: Interior wall edges, decorative borders and coordinated finishing details.
- Style: A sculpted finishing touch for a thoughtfully layered interior.
Key Features
- Baseboard adds definition and a polished finishing detail to your design.
- Honed marble offers a smooth matte surface that lets the natural veining take center stage.
- Natural variation makes each installation individual; blend pieces before installation.
- Coordinates with the Violetta tile and mosaic collection.
Care & Maintenance
Clean with a pH-neutral natural-stone cleaner and a soft cloth or mop. Wipe spills promptly; avoid vinegar, acidic cleaners and abrasive pads. Seal with a compatible penetrating stone sealer following its manufacturer's directions and reseal as needed. Use a qualified installer and a properly waterproofed substrate in wet areas.
WARNING: This product can expose you to chemicals including crystalline silica (airborne particles of respirable size) in dust created during fabrication/installation if the product is dry cut/ground or pulverized, which are known to the State of California to cause cancer. p65warnings.ca.gov
Specifications
| Tile / Sheet Size | 4-3/4x12 inches |
| Thickness | 3/4 inch |
| Finish | Honed |
| Material | Marble |
| Edge | Straight |
| Application | Interior wall edges, decorative borders and coordinated finishing details |
| Sold By | Individual piece |
| Linear Ft Per Piece | 1 |
| Weight Per Selling Unit | 4.30 lb |
Installation
MATERIAL INSPECTION
There will be naturally occurring variations in the color, pattern, texture, and veining that may differ from what was pictured. Before you begin installation, please inspect the goods for any damage or defects such as chipped edges or broken pieces. We cannot make any adjustments or provide service after the installation has begun.
SUBSTRATE
To ensure a proper installation, the tile must be installed over a suitable substrate. Tile should be installed over a clean flat surface that is free of contaminants, including curing compounds. The substrate should be free of cracks. If used in a wet area, it is essential to waterproof. See manufacturer's recommendation for a waterproofing and crack prevention membrane that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces. In all corner joints, install using silicone caulking sealant instead of grout.
INSTALLATION
We recommend that you dry-fit your pattern first. Think about the cuts in advance and visualize the installation. Make sure that you practice laying out the pattern. This will also help you plan out the placement of the pieces, which is especially helpful with tiles that have a lot of variation. To avoid affecting the color of the tile, we highly recommend using white thin-set mortar. For faster installation, use a rapid curing thin-set mortar. Apply as much adhesive as can be covered within 10-15 minutes Grout joint should be a minimum of 1/16” and not butt set Prior to fixing the tiles in the mortar bed, use the flat side of the trowel to smooth down the ridges We suggest using a 9" Trowel with a 1/8" square notch
GROUTING
Before grouting, test an area to make sure the stone surface will not scratch. Grout joints should be packed full. Do not leave pits or voids. Clean excess grout as you work. Do not let it harden completely. Never use acids to clean grout haze. Use a damp sponge for the final cleaning and to smooth out the grout joints. We highly recommend applying grout release prior to grouting the tile to facilitate cleaning and for protection against staining from contrasting color grouts.
Care & maintenance
Shipping & returns
All orders ship out within 2–3 business days. We accept returns within 30 days. See our Refund Policy for full details. Sample orders are not returnable.
-
I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:
-
I know the size of the area I want to tile. Calculate the number of tiles I need to order:
You need units. We recommend that you order units (10% extra) to cover cuts and future repairs.
Quantity
Enter room dimensions in feet. For multiple areas, enter the combined square footage below.
- Total required
Product total before shipping, tax, and discounts.
Finishing touches
Complete your project
Explore coordinating trim from this collection. Check the profile, thickness, and finish before ordering.
Keep exploring
Similar items
Discover related tiles and other designs for your space.
